Cueman Posted August 18, 2004 Report Share Posted August 18, 2004 Hey everyone, just wanted to know if I have to disconnect anything when i rotate the engine forward on my '95 cutty. I don't want to twist any fuel lines or anything...Thanks in advance Quote Link to comment Share on other sites More sharing options...
Robby1870 Posted August 19, 2004 Report Share Posted August 19, 2004 nope, just pull it forward Quote Link to comment Share on other sites More sharing options...
DiscoStudd Posted August 19, 2004 Report Share Posted August 19, 2004 You might want to disconnect the air intake snorkel from the throttle body. If you're rotating the motor to change the back spark plugs, it's not necessary on the 3100. I got to the back 3 on the 3100 in my 96 Loomie without rotating the motor. I did have to unbolt the ICM (coil packs and module) bracket and swing it out of the way, and I had to perch myself on top of the manifold, but it was a piece of cake... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.